Hunter Scavo Bowl Light Kit
SKU:
24122
A$199.00
A$199.00
per item
Receive a 20% discount for pick up orders.
Use coupon code PICKUP when finalising your order
Or to find a store near you
CLICK HERE
Use coupon code PICKUP when finalising your order
Or to find a store near you
CLICK HERE
The Hunter Scavo Bowl Light Kit is pre wired to connect directly into your Hunter fan. Included in the Light Kit is 2 x E27 light sockets rated at 60 watts maximum (globes not included), plus 4 different coloured finials*, so the Light Kit is suitable for a number of fan finishes.
*Comes complete with an Bright Brass, Brushed Nickel, Satin Brass & White finials
This Light Kit comes with a pull chain mechanism. This means that if you are replacing a light in your home with a fan and light, then no additional wiring is required, as the fan light can be operated by the pull cord. Should you wish to operate the light from a wall switch, your electrician will need to run an extra wire, or use a remote control to operate both the fan and the light kit.*Comes complete with an Bright Brass, Brushed Nickel, Satin Brass & White finials
*Comes complete with an Bright Brass, Brushed Nickel, Satin Brass & White finials
This Light Kit comes with a pull chain mechanism. This means that if you are replacing a light in your home with a fan and light, then no additional wiring is required, as the fan light can be operated by the pull cord. Should you wish to operate the light from a wall switch, your electrician will need to run an extra wire, or use a remote control to operate both the fan and the light kit.*Comes complete with an Bright Brass, Brushed Nickel, Satin Brass & White finials
Light Kit Dimenions
When fitted to a Hunter ceiling fan, this light kit will add 210mm to the overall height dimensions of the ceiling fan.
The Hunter Bowl Light Kits can be connected easily to a Hunter ceiling fan, as the light has a plug connector which simply clips into the connector on the ceiling fan. This enables the light to be a DIY installation, if the fan is already installed.
This fan light connects to the ceiling fan using the two keyhole slots on top of the light, which connect to corresponding screw holes in the ceiling fan, ensuring a solid connection designed to minimise wobble of the light kit. NB: The threaded rod merely acts as a cable carrier.
The Hunter Bowl Light Kits can be connected easily to a Hunter ceiling fan, as the light has a plug connector which simply clips into the connector on the ceiling fan. This enables the light to be a DIY installation, if the fan is already installed.
This fan light connects to the ceiling fan using the two keyhole slots on top of the light, which connect to corresponding screw holes in the ceiling fan, ensuring a solid connection designed to minimise wobble of the light kit. NB: The threaded rod merely acts as a cable carrier.
Warranty
The Hunter Light Kit comes with a 12 month replacement warranty
Specifications
For a printable Specification Sheet or Installation Instructions please download the relevant pdf below
| Bowl Light Kit Specification Sheet.pdf |
| Bowl Light Kit Installation Guide.pdf |